This is a complete fortified camp set based on the "HOPPIDUS" modular system for ancient fortifications. This set contains a selection of modules particularly indicated for medium to late Imperial Roman, the time of the great frontiers on the Rhine and the Danube and, of course, Hadrian Wall. It is also suitable for well into the post-Roman period, for example as Saxon shore fort.
All the fortifications elements are supplied unpainted in kit and require assembly. This set include all the modules required to make 8 elements of TF for DBM that can be used as field fortifications or to make a fortified camp large enough to hold 8 element of baggage.
It includes 6 x 15for-A, 2 x 15for-B, 2 x 15for-C, 8 x 15for-H, 2 x 15for-U and 1 x 15for-G, 21 modules in total. The end bits can be used to end a line of field fortifications in a better looking way or for the edges of a gap left in the fortification line to be used as gate. HOPPIDUS is a truly modular system, and all elements of this set are compatible with each other. This means you can also add more elements from the complete HOPPIDUS range to expand and customize this basic set.
For your convenience we offer also some expansion pack designed specifically for this set, but remember you can pick and choose any combination of modules you like, at any time, just e-mail us your requirements!

To order, just and tell us what you'd like and the delivery address, we'll check what we have in stock, calculate the total for you, give you a delivery date and send you a money request via paypal, so all you'll have to do at that point will be to click "accept" if you are happy with it.
If you prefer you can also order directly using our handy shopping cart.

Click here for shipping charges

SORRY! Unfortunately this item is temporarily out of stock!
We expect to have it available again before end of June 2008.

This is a conversion pack, composed of two "L" shaped corner elements, especially designed to allow elements to defend right on top of the embankment and still be legal under DBM rules. To explain this better look at this image:

this is where an element is required to be to defend the TF by the "no internal frontage" requirement in the DBM rules using the round corner 15FOR-C which comes with the standard pack.
Now look at this image:

this is where that same element can be to defend the TF when using the 15FOR-T corners included in this conversion pack.

The pack include all the modules required to make two corners: 2 x 15FOR-T, 4 x 15FOR-H and 1 x 15FOR-V.
PLEASE NOTE that each of these corner element counts as two TF elements plus one (AP free) corner in DBM terms.

You can form a gate simply by leaving a gap in the fortification line, and eventually use the module 15FOR-G to cover the ends. For those who prefer to have a more impressive fortified barred gate, the answer is this gate pack. It is actually a complete subsystem which consist of two truncated embankment elements, (left and right, each with his timber stockade) which leave a full module frontage (40mm) gap in the middle, and a wooden barred gate of the same frontage to close the gap itself. This forms the base for a separate wooden superstructure to defend the gate, which include a pontoon, a frontal parapet and two side supports with access ladders nailed on.
The entire gate subsystem is 3 elements wide (120mm), it is composed of 10 parts, requires assembly and is sold as a single (unpainted) item. The pack include all the modules required to make the gate: 1 x 15FOR-I.
PLEASE NOTE that this entire set counts as two TF elements plus one gate element in DBM terms.

This emplacement include a single extra deep embankment element with his stockade and allow you to place an artillery base or any other particularly deep base like hordes right to the top of the rampart. As such if you play DBM is most useful when used in conjunction with HOP4-b corners. It can be used with round corners and next to another similar extra-deep emplacement, but for the best visual appeal we suggest to use at least one standard embankment between these.
The pack include both the modules required to make the emplacement: 1 x 15FOR-L and 1 x 15FOR-H. keep in mind that the deeper embankment while perfectly legal under DBM will reduce the space available for baggage inside a camp!
PLEASE NOTE that this set counts as one TF element in DBM terms.